webcamxp - dslreports.com

Author	All Replies
goldenlady @bellsouth.net	webcamxp I am trying to set up a webcam using the software webcamxp. I have a dsl modem motorola 2210-06 and a DI-624. Using xphome as a os. I have modified the modem as suggested in another post so only the di-624 is acting as a router. I have set up a static IP address , my ports are open and I can access the cam on my home network but cannot broadcast to the net. I am not sure if ATT dsl can work with a static IP. I would like some suggestions or if anyone has the same software. I am not real techinical and need simple instructions Thanks
goldenlady @bellsouth.net	to forum · permalink · 2009-06-24 12:29:32 ·
SoonerAl Old Enough To Know Better Premium,MVM join:2002-07-23 Norman, OK	Are you calling the correct public IP address of the router, ie. the IP assigned by AT&T? Get that by going to »www.whatismyip.com from any PC on your home LAN. If the IP is dynamic, highly probable, look at using a free service like No-IP.com or DynDNS to map a fully qualified domain name [FQDN] to the AT&T DHCP assigned public IP. You would then call using the FQDN. You DI-624 may support that natively. Check the users guide for help. By the way here are the required port assignments for port forwarding. Verify you have them open and that they are not blocked by AT&T by going to »www.canyouseeme.org and run the test. »www.webcamxp.com/support.aspx This is probably more appropriate on the BBR Networking forum by the way... »Networking -- "When all else fails, read the instructions..." MS-MVP Windows Desktop Experience
	to forum · permalink · · 2009-06-24 13:42:34 ·


Wednesday, 11-Nov 01:08:54	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF